For many botanists, they want to move the plants from one area to another without damaging or completely killing the plants. This has been considered a convenient method as opposed to growing them which takes a lot of time and effort. Relocation of Growing Cycads through using their parent plants has been often used for conservation or commercial reasons.
Before the relocation, the first step involves removing the leaves at the bottom of a tree which are usually the older ones. This is done so as to reduce the effort required from the roots after moving to a new space to supply the many leaves with essential nutrients. The person relocating the plant will also need to note the directional orientation of the leaves and mark them to adjust position when moved.
The mover is then required to measure the caudex which is an essential part of the tree that stores water. The diameter of the caudex is them multiplied either 3 or 4 times to come up with the diameter for the hole to be dug around the tree. The same 3 to 4 larger diameters is also used in getting the depth of the hole dug to remove the roots of the tree.
If the holes are properly dug, then the process of removing the tree will be easier when pulling it. However, the investors need to be extra cautious when removing the tree so as to avoid damaging the roots as this may lengthen its recovery time. Additionally, the extra weight of plants due to soil on the roots is also removed by hosing.
On removing the roots and hosing off the extra soil, the person relocating the plant needs to check the condition of all roots for any extensive damage. During the check, they should also cut out the ragged roots attached to the root ball but are outside it. The roots are then treated with fungicide and rooting hormone so as to ensure they are not affected by pests or end up rotting.
Moving the tree will require using a machine and a vehicle. The plant can either be moved so as to be potted, boxed or relocated to a new location. For relocation, the mover needs to have found a good spot for the plant. For example, a cycad needs well drained soil often sandy in a sloppy area. While transportation, further root damage needs to be avoided.
In the new location, a hole with the diameter 1 and half more than that of a root ball diameter is dug. The 1 and a half more measurement is also used to dig the deepness of the hole. The directional orientation of the leaves is then noted to guide those placing the tree into the hole. The depth of soil to the plant should also be similar to that in the original location to reduce the plant stress.
A trench is then dug around it on which 5 gallons of water mixed with rooting hormone is added to supply the plant for two to three weeks. The first leaves produced by the tree may be very different from those produced in the original location example color and size, however, with time the plant will adapt and become healthier.
Before the relocation, the first step involves removing the leaves at the bottom of a tree which are usually the older ones. This is done so as to reduce the effort required from the roots after moving to a new space to supply the many leaves with essential nutrients. The person relocating the plant will also need to note the directional orientation of the leaves and mark them to adjust position when moved.
The mover is then required to measure the caudex which is an essential part of the tree that stores water. The diameter of the caudex is them multiplied either 3 or 4 times to come up with the diameter for the hole to be dug around the tree. The same 3 to 4 larger diameters is also used in getting the depth of the hole dug to remove the roots of the tree.
If the holes are properly dug, then the process of removing the tree will be easier when pulling it. However, the investors need to be extra cautious when removing the tree so as to avoid damaging the roots as this may lengthen its recovery time. Additionally, the extra weight of plants due to soil on the roots is also removed by hosing.
On removing the roots and hosing off the extra soil, the person relocating the plant needs to check the condition of all roots for any extensive damage. During the check, they should also cut out the ragged roots attached to the root ball but are outside it. The roots are then treated with fungicide and rooting hormone so as to ensure they are not affected by pests or end up rotting.
Moving the tree will require using a machine and a vehicle. The plant can either be moved so as to be potted, boxed or relocated to a new location. For relocation, the mover needs to have found a good spot for the plant. For example, a cycad needs well drained soil often sandy in a sloppy area. While transportation, further root damage needs to be avoided.
In the new location, a hole with the diameter 1 and half more than that of a root ball diameter is dug. The 1 and a half more measurement is also used to dig the deepness of the hole. The directional orientation of the leaves is then noted to guide those placing the tree into the hole. The depth of soil to the plant should also be similar to that in the original location to reduce the plant stress.
A trench is then dug around it on which 5 gallons of water mixed with rooting hormone is added to supply the plant for two to three weeks. The first leaves produced by the tree may be very different from those produced in the original location example color and size, however, with time the plant will adapt and become healthier.
About the Author:
When you are looking for information about growing cycads, go to our web pages online here today. More details are available at http://stores.botanicwonders.com/cycads now.
Aucun commentaire:
Enregistrer un commentaire