The home is susceptible to the growth of molds especially if it is located in a location known to have high humidity levels. Some of the molds are usually poisonous and may affect the health of those inside the house. However, home owners can invest in a Mold Testing Illinois kit to help identify various facts about the molds.
The kits can either test the type of molds, if they are molds while others check both. As with the lift tape kits, they use a tacky and sticky surface to test the type of the molds. The tacky surface covers the sticky one which is placed onto the molds and then recovered by the tacky surface. The user then takes the tape to a laboratory where the exact type of molds is identified.
The next type of kit is used to check if there are molds. It includes a swab in a test tube and is names the instant kit. The swab is usually rubbed onto the surface that one suspect could be molds then returned into the tube. It is acceptable to set for approximately ten minutes then after that the owner can compare the color of the test tube with that presented in the color chart provided with the kit to analyze the results.
The next kit known as the viable kit tests both the presence and exact type of the molds. In the kit, there is a petri dish that contains a gel like substance and a swab. The swab is rubbed over the molds similar to when using the instant kits but then it is also rubbed on the gel. The petri dish is then closed and kept in that condition for 3 to 7days to allow the molds to grow if any.
Other than testing for molds, the viable kits are also used to test the quality of air in a house. This is achieved through using two kits which will have one of the petri dishes placed inside the house in one of the rooms and another placed outside the house but as close as possible to the room in which the other dish is placed. The dishes are opened for an hour then closed for 7days. The results should be similar; if not laboratory testing is necessary.
The same kit can also be used to check the heating and cooling system of the home. To do this, all the vents should be closed except the one that is far away from the system. The kit is placed on the vent that is left open; the system is then switched on to maximum setting. Allow the system to run in this setting for ten minutes then remove the dish. Close it and check it after 7 days for molds growth.
After noticing the presence of molds, many people will automatically try to remove them. This is very hazardous to their health especially if they are not sure of the exact types of molds. Some of them are very poisonous and their removal without the necessary precautions can lead to dire consequences. An expert is thus the best person to remove molds.
Do not let molds grow in your home and ignore them as they will consequently have a negative effect on those in the home. Some common health effects include itchy and irritated eyes and frequent headaches. The molds may also irritate existing illnesses example asthma and skin diseases.
The kits can either test the type of molds, if they are molds while others check both. As with the lift tape kits, they use a tacky and sticky surface to test the type of the molds. The tacky surface covers the sticky one which is placed onto the molds and then recovered by the tacky surface. The user then takes the tape to a laboratory where the exact type of molds is identified.
The next type of kit is used to check if there are molds. It includes a swab in a test tube and is names the instant kit. The swab is usually rubbed onto the surface that one suspect could be molds then returned into the tube. It is acceptable to set for approximately ten minutes then after that the owner can compare the color of the test tube with that presented in the color chart provided with the kit to analyze the results.
The next kit known as the viable kit tests both the presence and exact type of the molds. In the kit, there is a petri dish that contains a gel like substance and a swab. The swab is rubbed over the molds similar to when using the instant kits but then it is also rubbed on the gel. The petri dish is then closed and kept in that condition for 3 to 7days to allow the molds to grow if any.
Other than testing for molds, the viable kits are also used to test the quality of air in a house. This is achieved through using two kits which will have one of the petri dishes placed inside the house in one of the rooms and another placed outside the house but as close as possible to the room in which the other dish is placed. The dishes are opened for an hour then closed for 7days. The results should be similar; if not laboratory testing is necessary.
The same kit can also be used to check the heating and cooling system of the home. To do this, all the vents should be closed except the one that is far away from the system. The kit is placed on the vent that is left open; the system is then switched on to maximum setting. Allow the system to run in this setting for ten minutes then remove the dish. Close it and check it after 7 days for molds growth.
After noticing the presence of molds, many people will automatically try to remove them. This is very hazardous to their health especially if they are not sure of the exact types of molds. Some of them are very poisonous and their removal without the necessary precautions can lead to dire consequences. An expert is thus the best person to remove molds.
Do not let molds grow in your home and ignore them as they will consequently have a negative effect on those in the home. Some common health effects include itchy and irritated eyes and frequent headaches. The molds may also irritate existing illnesses example asthma and skin diseases.
About the Author:
Find a list of the benefits you get when you use mold testing Illinois services and more info about a reputable service provider at http://www.moldprochicago.com/moldprochicago.com/mold-services today.
Aucun commentaire:
Enregistrer un commentaire