The concept of antiquing has received a great deal of negative press due to people faking antiques. However, the methods utilized in creating fakes have other legitimate uses. One such use would be to create the appearance of rustic restaurant furniture to give the family business a new old look.
Some large retail chain restaurants have utilized this strategy, and the results have caught on. Many of the furnishings and decoration have that antique look and feel. However, when one considers the number of locations which must be decorated in this way, it becomes clear that these cannot be actual antiques.
A popular procedure utilized is glazing, which creates the look of layers of paint complete with cracks and areas fading into wood tone. Depending on how this look is to be achieved, it may be necessary to show no actual wood at all, as the glaze can be absorbed too deeply. By starting with a very light base tone, often a yellow or beige, then going to a dark earth-tone glaze, the effect can be achieved.
To avoid the absorption of glaze a primer can be used so long as it is given light sanding prior to the base coat. The base coat should be brushed on and allowed to dry overnight. The paint and glaze mixture is sometimes brushed on, but is also sometimes rolled on before being wiped off with a clean cloth until it has the right look to it.
One will want to wipe the glaze and paint coat while it is very wet, utilizing a uniform motion so that any aging or distressing appears to have occurred at the same time. If one is looking to create a marble-look, then rolling on the paint and glaze mixture prior to the ragging off method works best. It is always a good idea to practice with several techniques before deciding how to proceed on a project.
To really make an item look old one can actually chip and hammer at the wood before the painting or glazing even begins. This technique is often used when putting a newer piece into a room filled with antiques. This can really make the room come together.
There are a few methods utilized to create rust in metals, including touches of actual rust-colored metallic paint. However, if one wishes to have real rust, then the item will need to be left outdoors for a period of time, often buried. Knowing that, it is amusing to go into restaurants and see if you can identify pieces which have been buried versus ones that were spattered with rust-colored metal paint.
Not only hardware for furnishings gets rusted, but any recreated farming tools or equipment will need to get the treatment. In fact, by burying the thing in the yard, one can get the newest machete to look like it belonged to a great, great ancestor. Just place it above a printed family photo placed in an antiqued frame, and you can almost bring a corner of the living room back to the past.
Some large retail chain restaurants have utilized this strategy, and the results have caught on. Many of the furnishings and decoration have that antique look and feel. However, when one considers the number of locations which must be decorated in this way, it becomes clear that these cannot be actual antiques.
A popular procedure utilized is glazing, which creates the look of layers of paint complete with cracks and areas fading into wood tone. Depending on how this look is to be achieved, it may be necessary to show no actual wood at all, as the glaze can be absorbed too deeply. By starting with a very light base tone, often a yellow or beige, then going to a dark earth-tone glaze, the effect can be achieved.
To avoid the absorption of glaze a primer can be used so long as it is given light sanding prior to the base coat. The base coat should be brushed on and allowed to dry overnight. The paint and glaze mixture is sometimes brushed on, but is also sometimes rolled on before being wiped off with a clean cloth until it has the right look to it.
One will want to wipe the glaze and paint coat while it is very wet, utilizing a uniform motion so that any aging or distressing appears to have occurred at the same time. If one is looking to create a marble-look, then rolling on the paint and glaze mixture prior to the ragging off method works best. It is always a good idea to practice with several techniques before deciding how to proceed on a project.
To really make an item look old one can actually chip and hammer at the wood before the painting or glazing even begins. This technique is often used when putting a newer piece into a room filled with antiques. This can really make the room come together.
There are a few methods utilized to create rust in metals, including touches of actual rust-colored metallic paint. However, if one wishes to have real rust, then the item will need to be left outdoors for a period of time, often buried. Knowing that, it is amusing to go into restaurants and see if you can identify pieces which have been buried versus ones that were spattered with rust-colored metal paint.
Not only hardware for furnishings gets rusted, but any recreated farming tools or equipment will need to get the treatment. In fact, by burying the thing in the yard, one can get the newest machete to look like it belonged to a great, great ancestor. Just place it above a printed family photo placed in an antiqued frame, and you can almost bring a corner of the living room back to the past.
About the Author:
You can visit www.mistymfg.com for more helpful information about Methods To Recreate Rustic Restaurant Furniture From Newer Pieces.
Enregistrer un commentaire